This plot 164 has had a K3 semi rotary pump installed as a part of the Allotment pump project. The pump is now working and can be used by any plot holder as a water source. All water pumps need a brisk pumping action, a weak pushing of the handle will not be enough to maintain a good water flow.
You need to prime this pump with water to get it to work. To do this unscrew the metal cap on the top of the pipe work. Then use the glass bottle with water in it and pour the water into the top of the pump until it reaches the top, about half the bottle. Then re screw the metal cap and then move the handle back and forth NOT in a circular motion about five times. You will feel the pressure change and water will pour out.
Installation work on this pump started in April 2105.The first thing i did was remove the very heavy concrete slab on top of the plot. It was then that i discovered that the well was half full of rubbish. The image right show the top of the well with the metal barrel construction damaged or bend over on purpose. Once i looked down into the well i could see a roll of carpet, soil and plastic flower pots.
Mr R. W. Weal was the tenant of plot 229 from 1946 until 1993 when his son Dennis Weal took over the plot. In the decades after WW2 a number of plot holders built their own wells as there was no mains water on the allotment until around 1995. Mr R Weal dug his well which is constructed of metal water tanks placed on top of each other with the bottom cut out. He also installed a K4 Semi-Rotary pump to extract the water.